Welcome to the Hebei Longquanjian Nail Industry Group Co.,Ltd.

WeChat public number

Domestic Business:0319-6536609  7587171
International Business:0319-3303883 3675155
Address:Yihe Industry Zone of Xingwan Town,Ren County,Hebei Province
P.C:055151
E-mail:
lqj10@cnlqj.com
Service Line:400-600-8769

Mobile internet

Copyright   © Heibei Longquanjian Nail Industry Group Co.,Ltd

    备案号 冀ICP备17024741号

Steel screws and common nail contrast

Classification:
Company news
2017/09/01 15:53
[Abstract]:
The steel wire nail is a T shaped object made of 45 low carbon steel. Flat head at one end, and the other end, sharp nail shank diameter 2.2 ¢, together by glue adhesion, main decorative fixed connect
The steel wire nail is a T shaped object made of 45 low carbon steel. Flat head at one end, and the other end, sharp nail shank diameter 2.2 ¢, together by glue adhesion, main decorative fixed connection effect, can also be used to hang items, using ST64 pneumatic gun used instead of steel nail with a hammer. The carbon content of steel nails is 0.4-2.8%, higher than steel nails. The steel row nail models are divided into 8 respectively st-18. St-25. ST - 32. ST - 38. ST - 45. ST - 50. ST - 57. ST - 64.
   
Common nail, have ordinary polishing iron nails, galvanized iron nails. Type: ordinary polished iron nails, galvanized iron nails
 
Common nail
Material: low carbon steel Q195, Q215, Q235 specification: 2 x 25mm<1 ", 2.5 x 50mm<2 ", 3.4 * 65mm<2.5 ", 4 x 75mm<3 ", 4.5 x 100mm<4 ", 4.5 x 125mm< 5"  
 
Iron nails are calculated by inches, an inch is 25.4 MM, 1.5 inch is equal to 40MM, 2 inch is 50MM, 2.5inch is 60MM, 3 inch is 75MM, 3.5inch is 90MM, 4 inches is 100MM
Steel nail making process requires wire drawing, nail shaping machine, polishing galvanizing, then glue bonding, the process is more complicated.
The nail making process: the garden nail is made by using the high quality rod to be removed and then processed. Specification model: 9.52mm - 88.90mm
 
The new pin features: can be nailed into the concrete wall. Is omitted after the drill hole in metope is commonly used in decorating nails into the steel nail into the wood after wedge nailed nail (steel) are more likely to use air pump pressure should be in the press, 0.4 ~ 0.8, nail fixed object should choose degrees than pensile article 1.5 cm - 2.5 cm, solid is not easy to damage the wall.
 
Common nail product features: flat cap, round rod, diamond tip, surface clean, anti-rust strength.
Use of steel lining: interior decoration, furniture manufacturing, wooden packing box, etc.
 
Common nail product use: the product is suitable for soft and hard wood, bamboo ware, ordinary plastic, soil wall, repair furniture, packing wooden cases, etc. It is widely used in construction, decoration, decoration and decoration.

资讯分类